Come to talk with you today about the use of LCD LCD conductive tape methods and matters needing attention, below to understand together.
1. connection requires the use of a structure to LCD the LCD screen with conductive tape and PCB plate fixed together. Conductive rubber strip, conductive silicone strip is the common name of conductive silicone connector.
2. does not require any welding, thereby STONE LCD eliminating damage to thermal efficient devices. Conductive silicone rubber can be used to connect some heated and vulnerable electronic components instead of welding.
3. can also replace welding at high temperature and radiation, when conductive silicone rubber not only provides a good conductive electrical circuit, but also makes the connection point in a sealed state, play a moisture-proof, anti-corrosion role ;” zero entry force “to prevent the liquid crystal display glass not damage the contact surface;
4. form a layer of airtight seal, so that the printed circuit board in adverse environment without atmospheric corrosion overnight to ensure good connection; buffer and shockproof; easy to adapt to a variety of contact methods; display can be inserted or removed many times.
5. cutting off a small piece of conductive tape to repair the position of the electric contact like the remote control, for the remote control of the battery electrode place of the iron is relatively easy to be corroded, if a bit of conductive tape on the electrode, one will not rust, two waterproof, three replacement is also convenient, it is a good choice.
LCD liquid crystal screen conductive adhesive when the use of attention: because the electrode spacing can be done very small, so suitable for driving a number of products, cheap, can help reduce costs; soft and elastic, easy to align, mainly used to LCD the LCD screen and PCB plate signal connection, with good electrical conductivity and stability.
When we use conductive rubber strips, be sure to wear insulated gloves before operation. Although the conductive tape itself does not conduct electricity, it does not indicate that the object connected by the conductive tape does not conduct electricity.
Special attention must be paid to ensure that the conductive tape connection of the object completely cut off the power supply after careful operation, or there will be small electric shock, large explosion situation.